Kramer Electronics VS-162V - Manual (Page 56)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
MENU Commands
52
Figure 22: Choosing what to INDICATE
To scroll the switcher setup (instead of showing the IN/OUT range), do the
following:
1. Press the MENU button until you reach the what to INDICATE command.
The MATRIX display shows the message:
what to INDICATE
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The displays show the messages:
Use OUTkey to configure
1: scroll SETUP 2: OUTs/INs
Current:
OUTs/INs
3. Press the OUT button 1.
The TAKE LED flashes and The displays show the messages:
Scroll switcher setup?
Press TAKE to execute
Current:
OUTs/INs
4. Press the TAKE button.
The displays show the messages:
display mode
changed
Current:
SETUP
11.9 Choosing the COMMUNICATION Setting
Choose the response option (reply or no reply).
To choose the No Reply response option, for example, do the following:
1. Press the MENU button until you reach the COMMUNICATION setting.
The MATRIX display shows the message:
COMMUNICATION setting
yes -> TAKE, next -> MENU