10 operating your video matrix switcher, 1 startup display, Operating your video matrix switcher – Kramer Electronics VS-162V User Manual
Page 34: Startup display, Figure 18
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Video Matrix Switcher
30
Figure 18: Keyboard Extension (EXT. KEYS) Connector
To use the Keyboard Extension, activate the extended KEYBOARD setting
Menu command, as section
10
Operating Your Video Matrix Switcher
You can operate your VS-162V using:
• The front panel buttons (as this section describes)
• RS-232 or RS-485 serial commands transmitted by a touch screen
system, PC
• The Kramer RC-IR2 Infrared Remote Control Transmitter
, or other serial controller
• Dry contact-closure switches connected to the keyboard extension
10.1 Startup Display
After switching on the power, the MATRIX and STATUS
1 For instructions on using Kramer Windows 95/98/NT
TM
Control Software, refer to the separate user manual (included on
the CD-ROM in .pdf format), Kramer Control Software
displays show the
following screens in sequence:
2 Version 1.5 is shown in the Status Display as an example; text in the Matrix Display may vary (according to machine
settings)