Kramer Electronics VP-16x18AK User Manual
User manual, Kramer electronics, ltd, Model
Table of contents
Document Outline
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VP-16x18AK 16 x 18 PC UXGA/Audio Router
- 5 Installing the VP-16x18AK in a Rack
- 6 Connecting and Configuring the VP-16x18AK
- 6.1 Connecting the VP-16x18AK
- 6.2 Connecting the Audio Outputs to Balanced/Unbalanced Acceptors
- 6.3 Connecting to the VP-16x18AK via RS-232
- 6.4 Connecting to the VP-16x18AK via RS-485
- 6.5 Connecting to the VP-16x18AK via the Ethernet Port
- 6.6 Setting the RS-485 Termination and Machine Number DIP-switches
- 7 Operating the VP-16x18AK Locally via the Front Panel Buttons
- 7.1 The Status Display
- 7.2 Switching Inputs to Outputs
- 7.3 The At Once and Confirm Modes
- 7.4 Setting the Audio Gain for Inputs and Outputs
- 7.5 Audio Output Bass and Treble Level Setting
- 7.6 Setting the Audio-Follow-Video or Breakaway Option
- 7.7 Storing and Recalling Setup Configurations
- 7.8 Locking and Unlocking the Front Panel Buttons
- 7.9 Reading and Writing the EDID
- 8 Operating the VP-16x18AK Remotely
- 9 Operating the VP-16x18AK Remotely Using a Web Browser
- 10 Firmware Upgrade Using K-Upload
- 11 Technical Specifications
- 12 Default Communication Parameters
- 13 Factory Default EDID
- 14 Table of ASCII Codes for Serial Communication (Protocol 3000)
- 15 Table of Hex Codes for Serial Communication (Protocol 2000)
- 16 Kramer Protocol