Kramer Electronics VS-162V - Manual (Page 47)

MENU Commands
43
43
status of the switcher and in the STATUS Display the letter “S” is
displayed behind the flashing cursor:
the UNIT is set in mode
FOLLOW system
If the status of the VS-162V unit differs from that of the other unit(s), set
the VS-162V unit to the Follow-SYSTEM mode. The MATRIX display
flashes the new status of the switcher and the TAKE LED flashes. Pressing
the TAKE button
1
To set the VS-162V unit to function in the Breakaway-from-SYSTEM mode:
implements all the changes to the same state as the rest of
the system placing the switcher in the Follow-SYSTEM mode.
1. Press the MENU button twice.
The MATRIX display shows the message:
FOLLOW the system
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The displays show the messages:
BREAKAWAY from system?
Press TAKE to execute
current:
follow SYS
3. Press the TAKE button again.
The MATRIX display shows the message:
the UNIT is set in mode
BREAKAWAY from system
11.3 Choosing the Video Format Setting
Choose a VIDEO FORMAT setting from a choice of 4 settings: CV, YC,
YUV and RGBS.
WARNING – changing the VIDEO FORMAT resets all the OUTs/INs
connections.
To choose the VIDEO FORMAT setting:
1. Press the MENU button until you reach the VIDEO FORMAT setting
command.
The MATRIX display shows the message:
VIDEO FORMAT setting
yes -> TAKE, next -> MENU
1 Pressing a different button cancels the operation and the switcher will remain in its previous state