Kramer Electronics VS-162V - Manual (Page 2)

Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 1
3 Overview 3
4 Your Video Matrix Switcher 4
4.1 Using the IR Transmitter 7
5 Installing the VS-162V in a Rack 8
6 Installing and Operating a Single VS-162V - Overview 9
7 Configuring the VS-162V Video Matrix Switcher 10
7.1 Configuring the Standalone VS-162V 10
7.1.1 Configuring a 16x16 Composite Video Switcher 10
7.1.2 Configuring an 8x8 s-Video (Y/C) Switcher 11
7.1.3 Configuring a 5x5 YUV/RGB Switcher 12
7.1.4 Configuring a 4x4 RGBS Switcher 12
7.2 Configuring 16x16 Multi-Channel Video Switchers 13
7.2.1 Configuring a 2-Unit 16x16 Y/C Switcher 13
7.2.2 Configuring a 3-Unit 16x16 YUV/RGB Switcher 14
7.2.3 Configuring a 4-Unit 16x16 RGBS Switcher 15
7.3 Configuring a Multi-Unit Matrix Switcher 15
7.3.1 Configuring a 32x16 Switcher 16
7.3.2 Configuring a 32x32 Switcher 17
7.4 Configuring a System of Interconnected Switchers 18
8 Understanding Addressing and System Modes 20
8.1 Setting the DIP-Switches 20
8.2 Setting the MACHINE # 21
8.3 Setting the MACHINE ADDRESS # 21
8.4 Understanding the SYSTEM Mode 21
8.5 Understanding the SLAVE Mode 22
9 Connecting a Control Interface 22
9.1 Connecting the RS-232 Control Interface 23
9.1.1 Connecting Two Units with a Null-Modem Adapter 24
9.1.2 Connecting Two Units without a Null-Modem Adapter 24
9.1.3 Connecting to a 9-pin PC COM Port with a Null-Modem Adapter 24
9.1.4 Connecting to a 9-pin PC COM Port without a Null-Modem Adapter 25
9.1.5 Connecting to a 25-pin PC COM Port with a Null-Modem Adapter 25
9.1.6 Connecting to a 25-pin PC COM Port without a Null-Modem Adapter 25
9.2 Connecting the RS-485 Control Interface 26
9.3 Configuring the Sync 29
9.4 Connecting the KEYBOARD EXTENSION 29