Kramer Electronics VP-31KSi User Manual
User manual, Kramer electronics, ltd, Model
Table of contents
Document Outline
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VP-31KSi 3x1 UXGA/Audio STEP-IN Switcher
- 5 Connecting the VP-31KSi 3x1 UXGA/Audio STEP-IN Switcher
- 5.1 Connecting the Balanced/Unbalanced Stereo Audio Output
- 5.2 Connecting Remote Contact Closure Input Selection Switches
- 5.3 Connecting the SI-1VGA Remote Step-in Module
- 5.4 Connecting the CAT 5 Twisted Pair Output
- 5.5 Connecting to the VP-31KSi via the RS232 Port
- 5.6 Connecting to the VP-31KSi via the RS-485 Port
- 5.7 Cascading Multiple VP-31KSi Devices
- 5.8 Controlling a Remote RS-232 Device
- 5.9 Connecting to the VP-31KSi via the Ethernet Port
- 6 Operating the VP-31KSi Locally via the Front Panel Buttons
- 7 Operating the VP-31KSi Remotely
- 8 Operating the VP-31KSi Remotely using a Web Browser
- 9 Updating the Firmware
- 10 Technical Specifications
- 11 Default Parameters
- 12 Table of ASCII Codes for Serial Communication (Protocol 3000)
- 13 Table of Hex Codes for Serial Communication (Protocol 2000)
- 14 Kramer Protocol