Kramer Electronics VS-162V - Manual (Page 59)

MENU Commands
55
55
11.12 Identifying the MACHINE
Display essential information (the product name and version number) to
identify your machine, for example, for technical support purposes.
To identify your machine, do the following:
1. Press the MENU button until you reach the Identifying the MACHINE
command.
The MATRIX display shows the message:
identify MACHINE
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The MATRIX display (as Figure 23 illustrates) shows the message:
Figure 23: Machine Identification
11.13 Choosing the Initial RESET
Choose to reset the machine
1
• Current status
to the:
2
• Factory default (resets to the pre-installed factory default state
(reloads the current setup)
3
Each VS-162V unit ships in its factory default
)
To reset the machine, do the following:
1. Press the MENU button until you reach the initial RESET command.
The MATRIX display shows the message:
initial RESET
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The MATRIX display shows the message:
Outkey 1: Current status
2: Factory default
1 Without having to switch the power off and on
2 Sometimes called a “soft reset”
3 Each VS-162V unit ships in its factory default state that is a 16x16 composite video matrix, with all setups empty and each
input connected to its corresponding output (for example, 1-to-1)