Festo Контроллеры двигателя SFC-LAC - Manual (Page 58)

3. Installation
3−4
Festo GDCP−SFC−LACI−DN−EN en 0812NH
1
Parameterising
interface (RS232)
2
Controller interface
3
Power supply
4
Earth terminal
5
Local digital I/Os
6
Motor connection
(e.g.ĂDNCE−...−LAS)
1
2
3
4 5 6
Fig. 3/1: Connections to the SFC−LACI
Connection to the SFC−LACI−DN Description
1 Parameterising
interface M8 socket, 4−pin RS232 interface for parameterising, commissioning and
diagnosis via FCT
} section 3.5
2 Controller
interface Sub−D, 9−pin, plug Interface for connecting to a PLC controller
} section 3.6
3 Voltage supply Sub−D−7WT, plug Voltage connection with 2 high−current contacts and
5 low−current contacts (separate load and logic voltage
supply)
} section 3.2
4 Earth terminal Stud bolt, M4 Connection for functional earth } section 3.3
5 Local digital
I/Os M8 socket, 3−pin Local digital inputs and outputs } section 3.9
6 Motor
connection Plug connector,
type ITT Cm3 Power supply for linear motor and sensor signals
} section 3.4
Tab. 3/1: Overview of connections