Festo Контроллеры двигателя SFC-LAC - Manual (Page 317)

B. Parametrizing via field bus
B−97
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Drive Data
PNU 1026 Various uint32 r(w)
Description General data of the SFC−LACI
Output Stage
Temp
1026 1 (CI: 01h) Aā: 49 r
Temp
Temperature of the SFC−LACI. Range: −20 ... +120 °C
Output Stage
Max Temp
1026 2 (CI: 02h) Aā: 50 r
Max Temp
Highest temperature measured to date for the SFC−LACI, in °C.
Stored in EEPROM
Max Current 1026 4 (CI: 04h) Aā: 52 rw
Current limiting. Identical to PNU 1034 / 6073h and 6510/41h
Device Control 1026 6 (CI: 06h) Aā: 54 rw
Identical to PNU 125 / 207Dh
Bit 0 = 0: Control interface OFF, control via HMI or FCT ON
Bit 0 = 1: Control interface ON
To enable FCT control after the control interface has been switched off,
set ENABLE OPERATION in the control word as well (objectĂ6040h)
Controller Serial
Number
1026 7 (CI: 07h) Aā: 55 r
Number
Serial number of the controller
CI 6510h Various uint32 r(w)
Further subindices of 6510h: see section C.3
DeviceNet C: 107 Aā: 49 ... 55 I: 1 uint32 r(w)
I 2 t Value
PNU 1027 ć uint32 r
Description Current I 2 t value. See PNU 1025/4
CI 6410h 04h uint32 r
DeviceNet C: 107 Aā: 41 I: 1 uint32 r