Festo Контроллеры двигателя SFC-LAC User Manual

Page 26

1. System summary

1−4

Festo GDCP−SFC−LACI−DN−EN en 0812NH

To construct a positioning system with the SFC−LACI, you
need the following components:

SFC−LACI

Motor controller, optionally with control panel

Drive

Electric drive DNCE−...−LAS or DFME−...−LAS, with accessories
and mounting attachments

Power supply unit 24 V

for logic voltage supply

Power supply unit 48 V

for load voltage supply

Power supply cable

for supplying the SFC−LACI with logic and load voltage
} section 3.2

Motor cable /
Encoder cable

for connecting the drive to the SFC−LACI
} section 3.4

Programming cable

for information transfer between the PC and the SFC−LACI
} section 3.5

Field bus cable

for information transfer between the higher−level controller
and the SFC−LACI

} section 3.6