Festo Контроллеры двигателя SFC-LAC - Manual (Page 46)

1. System summary
1−24
Festo GDCP−SFC−LACI−DN−EN en 0812NH
FHPP−FPC (Festo Parameter Channel)
Optionally, an additional 8 I/O bytes can be used for
parameterisation via FPC. The additional bytes can be
configured via the I/O data length (HMI, FCT software).
Assembly Object Data 1) TeleĆ
Input Output Byte
grams
FHPP standard 128 130 8 1
FHPP standard
+ FPC 129 131 16 3
1) Setting the data length, see CI object 2FF5
Tab. 1/4: Data length
If the FPC is not needed in normal operation, the data length
can be reduced to 8 bytes (= FHPP standard) in order to
optimise the PLC access in cyclic data transfers. Instead of
3Ătelegrams, only one more telegram is then transmitted.
Parameter modifications can still be carried out with Explicit
Messaging".
Detailed information on the FHPP−FPC can be found starting
in the section B.2.