Festo Контроллеры двигателя SFC-LAC User Manual
Page 103
4. Control panel (only type SFC−LACI−...−H2)
4−19
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Enter password
As soon as a password is active, it will be scanned
automatically when the menu commands [Positioning],
[Settings] or [HMI control] are accessed.
1. Use the arrow keys to select a digit 0 ... 9.
2. Confirm your entry with OK
position will be displayed.
3. Repeat the entry for the remaining entry positions.
When the correct password is entered, all parameterising and
control functions of the control panel are enabled until the
power supply is switched off.
Changing/deactivating the password
If the password has not yet been entered since the unit was
switched on:
·
Select the menu item [Settings] [Password edit] and enter
the existing 3 digit password:
1. Use the arrow keys to select a digit 0 ... 9.
2. Confirm your entry with OK
position will be displayed.
3. Repeat the entry for the remaining entry positions.
If the password has already been entered since the unit was
switched on:
4. Enter the new password with 3 digits. If you wish to
deactivate the password, enter 000".
5. After entering the last digit, save your setting with
SAVE
Enter Password:
[ ? x x ] = 0
ESC