Festo Контроллеры двигателя SFC-LAC - Manual (Page 251)

B. Parametrizing via field bus
B−31
Festo GDCP−SFC−LACI−DN−EN en 0812NH
B.4.2 Overview of parameter numbers (PNU)
The following overview shows the avaiilable FHPP parameters
arranged according to the parameter number PNU for
parameterising as per FPC.
A detailed description of the parameters can be found in the
sections B.4.4 to B.4.10.
You will find an overview of the available CI objects in
sectionĂC.2.
Name PNU SI
Device Data
Manufacturer Hardware Version BCD 0100 ć
Manufacturer Firmware Version BCD 0101 ć
Version FHPP 0102 ć
Version FCT PlugIn BCD 0104 1 ... 2
Version Axis Interface 0106 ć
Supported Drive Modes 0112 ć
Controller Serial Number 0114 1 ... 12
d
Controller Type 0115 ć
Manufacturer Device Name 0120 1 ... 30
d
User Device Name 0121 1 ... 24
d
Drive Manufacturer 0122 1 ... 30
d
HTTP Drive Catalog Address 0123 1 ... 30
d
Festo Order Number 0124 1 ... 30
d
Device Control 0125 ć
HMI Parameter (control panel parameter) 0126 1 ... 4
Data Memory Control (EEPROM commands) 0127 1 ... 3