Festo Контроллеры двигателя SFC-LAC - Manual (Page 304)

B. Parametrizing via field bus
B−84
Festo GDCP−SFC−LACI−DN−EN en 0812NH
Direct mode: Positioning mode
Direct Mode Base Velocity
PNU 540 ć uint32 rw
Description Reference value for speed specifications in FHPP direct mode.
The master transmits a percent value, which is multiplied by the base value to
reach to the final setpoint speed.
CI 21F8h 00h uint32 rw
DeviceNet C: 105 Aā: 40 I: 1 uint32 rw
Direct Mode Acceleration
PNU 541 ć ć uint32 rw
Description Acceleration in direct mode in [Inc/s 2 ]
CI 20EEh 22h uint32 rw
DeviceNet C: 104 Aā: 7 I: 34 uint32 rw
Direct Mode Deceleration
PNU 542 ć ć uint32 rw
Description Deceleration in direct mode in [Inc/s 2 ]
CI 20EFh 22h uint32 rw
DeviceNet C: 104 Aā: 8 I: 34 uint32 rw
Direct Mode Jerk Acceleration
PNU 543 ć ć uint32 rw
Description Jerk when accelerating in direct mode in [Inc/s 3 ]
The internal calculation is done with 1 /
10
of the value.
CI 20E7h 22h uint32 rw
DeviceNet C: 104 Aā: 9 I: 34 uint32 rw