beautypg.com

Displaying lacp group status – Allied Telesis AT-S106 User Manual

Page 94

background image

Chapter 7: LACP Port Trunks

94

Displaying LACP Group Status

To display the LACP Group Status, do the following procedure:

1. Select the Bridge folder.

The Bridge folder expands.

2. From the Bridge folder, select the Trunk Config. folder.

The Trunk Config. folder expands.

3. From the Trunk Config. folder, select LACP Group Status.

The LACP Group Status Page is displayed. See Figure 28 for an
example of the default display.

Figure 28. LACP Group Status Page

Note

Go to “Creating a Port Trunk” on page 79 to directly change the
parameters on this page:

See also other documents in the category Allied Telesis Computer hardware: