Allied Telesis AT-S106 - Manual (Page 51)

AT-S106 Management Software Web Browser User’s Guide
51
Creating a Tagged VLAN
To create a tagged VLAN, do the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Tagged VLAN.
The Tagged VLAN Page is displayed. See Figure 16
Figure 16. Tagged VLAN Page
4. To assign a VLAN ID, type a VLAN ID in the VLAN ID field.
Choose a value between 2 and 4,093. You can configure up to 255
tagged VLANs.
5. To assign a name to the VLAN, type a name in the VLAN Name field.
Enter a value of up to 32 characters. For more information on this field,
refer to “VLAN Name” on page 47.