Allied Telesis AT-S106 - Manual (Page 110)

Chapter 8: Simple Network Management Protocol (SNMP)
110
Deleting a Host Table Entry
Use the following procedure to delete a Host Table entry:
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select Host Table.
The Host Table Page is shown in Figure 33 on page 108.
3. To delete an entry in the host table, click delete next to the entry in the
table that you want to remove.
The Host Table entry is removed from the table. No confirmation
message is displayed.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.