Allied Telesis AT-S106 - Manual (Page 184)

Chapter 16: Dial-in User Configuration
184
2. In the list of dial-in users, highlight the user you want to modify.
The user’s information is displayed in fields above.
3. In the User Name or Password fields, enter the revised user
information.
4. In the Dynamic VLAN field, revise the VID of the VLAN which you will
allow the user to access.
5. Click Apply.
6. To permanently save these settings in the configuration file, select
Save Configuration to Flash from the main menu to permanently
save your changes.
Delete a Dial-in
User
To delete a dial-in user, do the following procedure:
1. From the main menu, select Security > Dial-in User.
The Dial-in User page is shown in Figure 57 on page 183
2. In the list of dial-in users, highlight the user you want to delete.
3. Click Delete.
4. To permanently save these settings in the configuration file, select
Save Configuration to Flash from the main menu to permanently
save your changes.