Allied Telesis AT-S106 - Manual (Page 74)

Chapter 5: Port Configuration
74
EAP Pass
Extensible Authentication Protocol (EAP) packets are allowed on the
port.
Ignore—Indicates the All setting does not apply to the Admin.
Status field. In other words, each port is set individually.
Enabled—The port is able to send and receive EAP packets.
Disabled—The port is disabled and is not able to send or receive
EAP packets. This is the default setting for a port.
3. Click Apply to save the configuration.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.