Allied Telesis AT-S106 - Manual (Page 194)

Chapter 18: Management Software Updates
194
2. From the Firmware Upgrade folder, select via TFTP.
The Firmware Upgrade via TFTP page is shown in Figure 61.
Figure 61. Firmware Upgrade via TFTP Page
The Image/Version Date shows the current version and date of
software installed on the switch.
3. Change the following parameters as necessary:
TFTP Server IP
The IP address of the TFTP server from which you are downloading
the new software.
Image File Name
The name of the AT-S106 file you are downloading.
Retry Count:
The number of times the firmware upgrade is retried. The default
number of tries is 5. The range is 1 through 20.
4. To activate your changes on the switch, click Apply.
The software immediately begins to download onto the switch. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.