Allied Telesis AT-S106 - Manual (Page 195)

AT-S106 Management Software Web Browser User’s Guide
195
Downloading or Uploading a Configuration File via HTTP
This section describes how to download or upload a configuration file
using HTTP on an Internet server. Before you upload or download a
configuration file via HTTP, note the following:
ˆ You must be able to access the new AT-S106 image file from your PC.
ˆ The switch that you are working with must have an IP address and
subnet mask assigned, either manually or via DHCP. For instructions
on how to set the IP address and subnet mask on a switch, see
“Configuring an IP Address, Subnet Mask and Gateway Address” on
page 24. To enable a DHCP client, see “Enabling and Disabling the
DHCP Client” on page 28.
To download or upload an AT-S106 configuration file onto the switch using
a web browser, perform the following procedure:
1. From the menu on the left side of the home page, select the Tools
folder.
This Tools folder expands.
2. From the Tools folder, select Config File Upload/Down folder.
This Config File Upload/Down folder expands.
3. From the Config File Upload/Down folder, select via HTTP.
The Configuration Upload/Download via HTTP Page is displayed. See
Figure 62.
Figure 62. Configuration Upload/Download via HTTP Page
Configuration
File Upload
1. Select the Upload button. Select this button to upload a configuration
file from the switch to your PC.