Allied Telesis AT-S106 - Manual (Page 33)

AT-S106 Management Software Web Browser User’s Guide
33
Configuring System Administration Information
This section explains how to enable password protection and create users
in the web interface. See the following sections:
ˆ “Adding System Administration Information” on page 33
ˆ “Modifying Administration Information” on page 34
ˆ “Deleting Administration Information” on page 35
Adding System
Administration
Information
To set a switch’s administration information, do the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select Administration.
The Administration Page is displayed. See Figure 8.
Figure 8. Administration Page
3. To enable or disable password protection, select Enable or Disable
from the pull-down menu next to the Password Protection field.
4. Click Apply.
You can control login authentication by enabling password protection
which requires a user to supply a password when logging onto the
switch. If you disable password protection, a user can login without
inputting a password. By default, this field is set to Enable.