Allied Telesis AT-S106 - Manual (Page 165)

165
Chapter 14
802.1x Port-based Network Access
Control
This chapter contains information about the 802.1x Port-based Network
Access Control and the procedures for setting this feature. This chapter
includes the following sections:
ˆ “Overview” on page 166
ˆ “Guest VLANs” on page 172
ˆ “Configuring 802.1x Port-based Network Access Control” on page 173
ˆ “Displaying the Port Access Control Status” on page 176
Note
If you choose to use a remote RADIUS server for 802.1x
authentication, see Chapter 15, “RADIUS Authentication Protocol”
on page 177 after you have followed the procedure in “Configuring
802.1x Port-based Network Access Control” on page 173 for your
switch.
Note
If you choose to use the local authentication server in the AT-S106
Management software for 802.1x authentication, see Chapter 16,
“Configuring a Dial-in User” on page 183 after you have followed the
procedure in “Configuring 802.1x Port-based Network Access
Control” on page 173 for your switch.
Note
To permanently save your new settings or any changes to the
configuration file, select Save Configuration to Flash from the main
menu on the left side of the page.