Allied Telesis AT-S106 - Manual (Page 113)

AT-S106 Management Software Web Browser User’s Guide
113
Deleting Traps
To delete a trap from an SNMP community, do the following procedure:
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select Trap Setting.
The Trap Setting Page is shown in Figure 34 on page 111.
3. In the Trap table, click delete next to the trap you want to delete from
the table.
The trap is removed from the Trap Setting Page. A warning message
is not displayed.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.