Allied Telesis AT-S106 - Manual (Page 35)

AT-S106 Management Software Web Browser User’s Guide
35
4. To change a password, enter a password of up to 12 alphanumeric
characters in the box next to the Password field including special
characters. See Appendix A, on page 213 for the specific characters.
5. To confirm the above password, retype the password in the box next to
the Confirm Password field.
6. Click Apply to activate your changes on the switch.
7. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Deleting
Administration
Information
To delete a user name, do the following procedure.
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select Administration.
The Administration Page is shown in Figure 8 on page 33.
3. Select the user name that you want to delete and click delete.
The user name is removed from the Administration Table.
4. Click Add to activate your changes on the switch.