Allied Telesis AT-S106 - Manual (Page 218)

Appendix A: AT-S106 Management Software Web Browser Default Parameters
218
SNMP/Community Table
SNMP Community
entries 8 entries -
Access Read-Only Read-Only/Read- Write
Community String none 1-20 characters
INDEX No. 1 -
SNMP Community
privilege Read-Only Read-Only/Read- Write
SNMP Community
Strings public 1-20 characters
INDEX No. 2 -
SNMP Community
privilege Read-Write Read-Only/Read- Write
SNMP Community
Strings private 1-20 characters
SNMP/Host Table
SNMP Host entries 10 entries -
SNMP Host IP address none 1~223.0~254.0~254.1~254; except 127.0.0.1
SNMP Host community
strings public public/private
SNMP/Trap Settings
Authentication Trap Enabled Enabled/Disabled
TRAP Receiver entries 10 entries -
TRAP Receiver version v1 v1/v2c
TRAP Receiver IP
address none 1~223.0~254.0~254.1~254; except 127.0.0.1
TRAP Receiver
community strings none 1-20 characters
Table 8. AT-S106 Management Software Default Settings (Continued)
Parameter
AT-GS950/48
Default Setting
Specifications