Allied Telesis AT-S95 CLI - Manual (Page 98)

Page 98
Allied Telesis
AT-S95 Management Software CLI User’s Guide
The entry is displayed in the show commands as a ‘DHCP Snooping entry’.
Example
The following example configures the DHCP snooping binding database and adds binding entries to the database.
clear ip dhcp snooping database
The clear ip dhcp snooping database Privileged EXEC mode command clears the DHCP binding database.
Syntax
clear ip dhcp snooping database
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example clears the DHCP binding database.
show ip dhcp snooping
The show ip dhcp snooping EXEC mode command displays the DHCP snooping configuration.
Syntax
show ip dhcp snooping [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Specify Ethernet port
• port-channel-number — Specify Port-channel number
Default Configuration
This command has no default configuration.
Command Mode
EXEC mode.
console# ip dhcp snooping binding 0060.704c.73ff 3 10.1.8.1 ethernet 1/e21 e
console# clear ip dhcp snooping database