Allied Telesis AT-S95 CLI - Manual (Page 38)

Page 38
Allied Telesis
AT-S95 Management Software CLI User’s Guide
show interfaces access-lists
The show interfaces access-lists Privileged EXEC mode command displays access lists applied on interfaces.
Syntax
show interfaces access-lists [ethernet interface | vlan vlan-id | port-channel port-channel-number]
Parameters
•
vlan-id— Specifies the ID of the VLAN.
• interface — The full syntax is: unit/port.
• port-channel-number — Valid port-channel Index.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays ACLs applied to the interfaces of a device:
console# show interfaces access-lists
Interface Input ACL
--------- ---------
1/e1 ACL1
2/e1 ACL3