Allied Telesis AT-S95 CLI - Manual (Page 137)

IP Addressing Commands
Page 137
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines default gateway 192.168.1.1.
show ip interface
The show ip interface Privileged EXEC mode command displays the usability status of configured IP interfaces.
Syntax
show ip interface [ethernet interface-number | vlan vlan-id | port-channel port-channel number]
Parameters
•
interface-number — Valid Ethernet port.
• vlan-id — Valid VLAN number.
• port-channel number — Valid Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example the displays the configured IP interfaces and their types.
console(config)# ip default-gateway 192.168.1.1
console# show ip interface
Gateway IP Address Activity status Type
------------------ ------ ---------------
192.168.1.1 Active Static