Dot1x timeout quiet-period, Dot1x timeout tx-period, Dot1x timeout quiet-period dot1x timeout tx-period – Allied Telesis AT-S95 CLI User Manual
Page 370

Page 370
Allied Telesis
AT-S95 Management Software CLI User’s Guide
dot1x timeout quiet-period
The dot1x timeout quiet-period Interface Configuration mode command sets the number of seconds that the
device remains in the quiet state following a failed authentication exchange (for example, the client provided an
invalid password). Use the no form of this command to return to the default configuration.
Syntax
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
Parameters
•
seconds — Specifies the time in seconds that the device remains in the quiet state following a failed
authentication exchange with the client. (Range: 0 - 65535 seconds)
Default Configuration
Quiet period is 60 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
During the quiet period, the device does not accept or initiate authentication requests.
The default value of this command should only be changed to adjust for unusual circumstances, such as
unreliable links or specific behavioral problems with certain clients and authentication servers.
To provide a faster response time to the user, a smaller number than the default value should be entered.
Example
The following example sets the number of seconds that the device remains in the quiet state following a failed
authentication exchange to 3600.
dot1x timeout tx-period
The dot1x timeout tx-period Interface Configuration mode command sets the number of seconds that the device
waits for a response to an Extensible Authentication Protocol (EAP)-request/identity frame from the client before
resending the request. Use the no form of this command to return to the default configuration.
Syntax
dot1x timeout tx-period seconds
no dot1x timeout tx-period
Parameters
•
seconds — Specifies the time in seconds that the device waits for a response to an EAP-request/identity
frame from the client before resending the request. (Range: 30 - 65535 seconds)
console(config)# interface ethernet 1/e16
console(config-if)# dot1x timeout quiet-period 3600