Allied Telesis AT-S95 CLI - Manual (Page 186)

Page 186
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Chapter 17.Login Banner Commands
login banner
The login banner Privileged EXEC mode command configures the login banner, which is a security message that
is displayed above the Telnet login prompt prior to login.
Syntax
login_banner banner
Parameters
•
banner — Security text message. (Range: 1 - 158 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the security banner to display ATI before the Telnet login prompt.
show login banner
The show login banner Privileged EXEC mode command shows the login banner that is displayed before a
Telnet login prompt.
Syntax
show login banner
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
console# login_banner ATI
Success
console#