Allied Telesis AT-S95 CLI - Manual (Page 284)

Page 284
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Chapter 28.SSH Commands
ip ssh port
The ip ssh port Global Configuration mode command specifies the port to be used by the SSH server. Use the
no form of this command to return to the default configuration.
Syntax
ip ssh port port-number
no ip ssh port
Parameters
•
port-number — Port number for use by the SSH server (Range: 1 - 65535).
Default Configuration
The default port number is 22.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the port to be used by the SSH server as 8080.
ip ssh server
The ip ssh server Global Configuration mode command enables the device to be configured from a SSH server.
Use the no form of this command to disable this function.
Syntax
ip ssh server
no ip ssh server
Parameters
This command has no arguments or keywords.
Default Configuration
Device configuration from a SSH server is enabled.
console(config)# ip ssh port 8080