Allied Telesis AT-S95 CLI - Manual (Page 315)

System Management Commands
Page 315
– physical-port-name = Product specific.
• When using the ping ipv6 command to check network connectivity of a directly attached host using its link
local address, the egress interface must be specified as defined in RFC 4007.
Example
The following example displays pinging results:
telnet
The telnet User EXEC mode command logs into a host hat supports Telnet.
Syntax
telnet {ip-address | hostname} [port] [keyword1...] telnet
console> ping 10.1.1.1
Pinging 10.1.1.1 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11
console> ping yahoo.com.
Pinging yahoo.com 66.218.71.198 with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11