Allied Telesis AT-S95 CLI - Manual (Page 272)

Page 272
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode without saving changes.
show spanning-tree
The show spanning-tree Privileged EXEC mode command shows spanning tree configuration.
Syntax
show spanning-tree [ethernet interface -number| port-channel port-channel-number] [instance instance-id]
show spanning-tree [detail] [active | blockedports] [instance instance-id]
show spanning-tree mst-configuration
Parameters
•
detail —Display detailed information.
• active — Display active ports only.
• blockedports — Display blocked ports only.
• mst-configuration — Display the MST configuration identifier.
• interface-number — Ethernet port number.
• port-channel-number — Port channel index.
• instance-id — ID associated with a spanning-tree instance.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
console(config) # spanning-tree mst configuration
console(config-mst) # abort