Show qos interface – Allied Telesis AT-S95 CLI User Manual
Page 212
Page 212
Allied Telesis
AT-S95 Management Software CLI User’s Guide
show qos interface
The show qos interface User EXEC mode command displays interface QoS information.
Syntax
show qos interface [buffers | queueing | policers | shapers | rate-limit] [ethernet interface-number | vlan vlan-
id | port-channel number] [queuing]
show qos interface [buffers | queueing | policers | shapers | rate-limit] [ethernet interface-number | vlan vlan-id |
port-channel number]
Parameters
•
buffers — Displaying buffer setting for the interface’s queues. Displays the minimum reserved setting.
•
queueing — Display the queue’s strategy (WRR or EF) and the weight for WRR queues and the CoS to
queue map and the EF priority.
•
policers — Display all the policers configured for this interface, their setting and the number of policers
currently unused.
•
shapers — Display the shaper of the specified interface and the shaper for the queue on the specified
interface.
•
rate-limit — Display the rate-limit configuration.
•
interface-number — Valid Ethernet port number.
•
vlan-id — Valid VLAN ID.
•
number — Valid port-channel number.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted, etc.) is displayed.
If no interface is specified, QoS information about all interfaces is displayed.
Example
The following example displays QoS information about Ethernet port 1/e16.
console> show qos interface ethernet 1/e16 queuing
Ethernet 1/e16
Strict Priority.
Cos-queue map:
cos
qid
0 2
1 1
2 1