Allied Telesis AT-S95 CLI - Manual (Page 143)

IP Addressing Commands
Page 143
Example
The following example deletes all entries from the host name-to-address mapping.
show hosts
The show hosts Privileged EXEC mode command displays the default domain name, a list of name server hosts,
the static and the cached list of host names and addresses.
Syntax
show hosts [name]
Parameters
•
name — Specifies the host name. (Range: 1 - 158 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays host information.
console# clear host dhcp *
console# show hosts
System name: Device
Default domain is gm.com, sales.gm.com, usa.sales.gm.com(DHCP)
Name/address lookup is enabled
Name servers (Preference order): 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host Addresses
---- ---------
accounting.gm.com 176.16.8.8 176.16.8.9 (DHCP)
Cache: TTL(Hours)
Host Total Elapsed Type Addresses