Allied Telesis AT-S95 CLI - Manual (Page 247)

SNMP Commands
Page 247
Example
The following example configures an SNMPv3 host.
snmp-server trap authentication
The snmp-server trap authentication Global Configuration mode command enables the device to send SNMP
traps when authentication fails. Use the no form of this command to disable SNMP failed authentication traps.
Syntax
snmp-server trap authentication
no snmp-server trap authentication
Parameters
This command has no arguments or keywords.
Default Configuration
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables SNMP failed authentication traps.
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system contact (sysContact)
string. Use the no form of this command to remove system contact information.
Syntax
snmp-server contact text
no snmp-server contact
Parameters
•
text — Specifies the string that describes system contact information. (Range: 0 - 160 characters)
Default Configuration
This command has no default configuration.
console(config)# snmp-server v3-host 192.168.0.20 john noauth
console(config)# snmp-server trap authentication