Allied Telesis AT-S95 CLI - Manual (Page 348)

Page 348
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays macs-groups information
switchport forbidden vlan
The switchport forbidden vlan Interface Configuration mode command forbids adding specific VLANs to a port.
Use the no form of this command to return to the default configuration.
Syntax
switchport forbidden vlan {add vlan-list | remove vlan-list}
Parameters
•
add vlan-list — Specifies the list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a
comma and no spaces. A hyphen designates a range of IDs.
• remove vlan-list — Specifies the list of VLAN IDs to be removed. Separate nonconsecutive VLAN IDs with a
comma and no spaces. A hyphen designates a range of IDs.
Default Configuration
All VLANs are allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command can be used to prevent GVRP from automatically making the specified VLANs active on the
selected ports.
console# show vlan macs-groups
MAC Address Mask Group ID
-------------- -------------- --------
0060.704C.73FF FFFF.FFFF.0000 1
0060.704D.73FF FFFF.FFFF.0000 1