Allied Telesis AT-S95 CLI - Manual (Page 90)

Page 90
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Syntax
show running-config
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the contents of the running configuration file.
show startup-config
The show startup-config Privileged EXEC mode command displays the contents of the startup configuration file.
Syntax
show startup-config
Parameters
This command has no arguments or keywords.
console# show running-config
software version 1.1
hostname device
interface ethernet 1/e11/e1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
interface ethernet 1/e2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000