Allied Telesis AT-S95 CLI - Manual (Page 270)

Page 270
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
show (mst)
The show MST Configuration mode command displays the current or pending MST region configuration.
Syntax
show {current | pending}
Parameters
•
current—Indicates the current region configuration.
• pending—Indicates the pending region configuration.
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
The pending MST region configuration takes effect only after entering the MST configuration mode.
Example
The following example displays a pending MST region configuration.
console(config) # spanning-tree mst configuration
console(config-mst) # revision 1
console(config-mst)# show pending
Pending MST configuration
Name: Region1
Revision: 1