Samsung SGH-T999MBATMB - Manual (Page 277)

Changing Your Settings 271
3. Tap Manual to locate and connect to a network
manually.
– or –
Tap Automatic to allow the device to automatically
select a network.
USB Tethering and Mobile HotSpot
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone
and computer. A wireless version of this same functionality
would be the Mobile AP feature.
Note: You can not mount your device’s microSD card to your
computer while using the USB tethering feature.
If additional software or USB drivers are required,
navigate to:
http://www.samsung.com/us/support/
downloads .
1. Press ➔ and then tap Settings ➔
More settings ➔ Tethering and Mobile HotSpot.
For more information, refer to “USB Tethering” on page 256.
For more information, refer to “Mobile HotSpot” on page
257.
Near Field Communication
This feature is used to read and exchange tags. When used
in conjunction with Android Beam, your device can be used
to beam application content when NFC-capable devices are
touched. For more information, refer to “TecTiles” on page
231.
1. Press ➔ and then tap Settings ➔
More settings.
2. Tap the NFC field. A check mark displayed next to the
feature indicating it is enabled.
Note: Enabling NFC also enables Android Beam and S Beam.
Android Beam
This feature (when activated via NFC) allows you to directly
beam application content to another NFC-capable device
when they are in direct contact. These files are typically
small such as Calendar and Contact entries.
1. Press ➔ and then tap Settings ➔
More settings.
2. Verify the NFC feature is active.