Samsung SGH-T999MBATMB - Manual (Page 272)

266
Manually Adding a Wi-Fi Network
1. Press ➔ and then tap Settings ➔ Wi-Fi ➔
Add network.
2. Enter the Network SSID (the name of your Wireless
Access Point).
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP (Wireless Access Point).
4. Enter your WAP’s password if the WAP is secure.
5. Tap Save to store the new information and connect to
the target WAP.
Note: An SSID is a unique key which identifies a wireless LAN.
Its purpose is to stop other wireless equipment from
accessing your LAN — whether accidentally or
intentionally. To communicate, wireless devices must be
configured with the same SSID.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a
device name, activate your phone so other Bluetooth devices
can discover it, or scan for other, available Bluetooth devices
with which to pair. For more information, refer to “Bluetooth”
on page 245.
Turning Bluetooth On and Off
To turn Bluetooth on:
1. Press ➔ and then tap Settings.
2. In a single motion touch and slide the Bluetooth slider
to the right to turn it on .
The slider color indicates the activation status. When
active, displays in the Status area.
To turn Bluetooth off:
1. Press ➔ and then tap Settings.
2. In a single motion touch and slide the Bluetooth slider
to the left to turn it off .
Note: Bluetooth must be enabled prior to use.
ON
OFF