Samsung SGH-T999MBATMB User Manual
Page 204
198
•
I have a new device and the hub is connected but it doesn’t show
up in my list:
• Force the hub to disconnect from any previously paired
devices:
–
Press and hold the RESET button (on the back of the hub),
for about FOUR seconds until the LED begins to blink
RED
.
–
Access your new device’s AllShare Cast screen and rescan for
the existing hub/dongle.
–
Press the RESET button on the hub for ONE second until the
LED turns
BLUE
.
–
Tap the entry from your device’s AllShare Cast screen and
confirm connection.
AllShare Cast Hub - Streaming Videos
The hub supports streaming of purchased media content that
contains DRM (Digital Rights Management).
Note: You can control the volume level of your playback file
being shown on your TV by using your device’s Volume
buttons. For additional volume, use your TV’s volume
controls.
To stream video content to your Tv via AllShare Cast Hub:
1. Connect your AllShare Cast Hub to your TV. For more
information, refer to “Connecting AllShare Cast Hub”
2. Verify your TV is set to the same source as your hub
and that you can see the on-screen connection and
configuration tutorials.
3. On your device, press
➔
and then tap
Settings ➔ More settings ➔ AllShare Cast.
4. In a single motion touch and slide the AllShare Cast
slider to the right to turn it on
. A list of
available hubs will appear on the screen.
ON