Campbell Scientific CR200/CR200X-series Dataloggers - Manual (Page 74)

Section 8. CR200(X) Configuration
The information in the dialog helps to corroborate the signature of the operating
system sent.
8.3 Settings
8.3.1 Settings via DevConfig
The CR200(X) has a number of properties, referred to as "settings", some of
which are specific to the PakBus® communications protocol.
Read More! PakBus® is discussed in PakBus® Overview (p. 133) and the
PakBus® Networking Guide available at www.campbellsci.com .
DevConfig | Settings Editor tab provides access to most PakBus® settings,
however, the DevConfig | Deployment tab makes configuring most of these
settings easier.
Figure 40: DevConfig Settings Editor
As shown in FIGURE. DevConfig Settings Editor (p. 62), the top of the Settings
Editor is a grid that allows the user to view and edit the settings for the device.
The grid is divided into two columns with the setting name appearing in the left
hand column and the setting value appearing in the right hand column. Change
the currently selected cell with the mouse or by using up-arrow and down-arrow
keys as well as the Page-Up and Page-Down keys. When clicking in the setting
names column, the value cell associated with that name will automatically be
made active. Edit a setting by selecting the value, pressing the F2 key or by
62