Campbell Scientific CR200/CR200X-series Dataloggers - Manual (Page 188)

Appendix B. Status Table and Settings
Table 26. Status Table Fields and Descriptions
Status Table
Fieldname Description Variable Type Default
Normal
Range
User can
change? Info Type
RecNum Increments for successive
status table data records
_ 0 to 2 ^32 _ _
TimeStamp Time the record was
generated
Time _ _ _
ProgName Name of current (running)
program.
String _ _ _ Status
OSVersion Version of the Operating
System
String _ _ _ Status
OSDate Date OS was released. String _ _ _ Status
ProgName Name of current (running)
program.
String _ _ _ Status
ProgSig Signature of the current
running program file
including comments. Does
not change with operating
system changes.
Integer _ _ _ Status
CalOffset Calibration table of single
ended offset values. Each
integration / range
combination has a single
ended offset associated
with it. These numbers are
updated by the
background slow
sequence if needed in the
program.
Integer array of 18 _ close to 0 _ Calib
PakBusAddress 1 CR200(X) PakBus
address.
String 1 1 to 3999 Yes Config PB
RfInstalled Indicates the model of RF
radio installed
Integer _ _ _ Status
RfNetAddr Address of the RF network Integer 0 0 to 63 Yes ConfigPB
RfAddress Address of the RF radio Integer 0 0 to 1023 Yes ConfigPB
RfHopSeq RF hopping sequence for
the RF network
Integer 0 0 to 6 Yes ConfigPB
RfPwrMode Powermode of the RF
radio
String _ _ _ ConfigPB
Rf_ForceOn Any non-zero number will
override the current power
mode and set it on.
Integer 0 Yes ConfigPB
Rf_Protocol Protocol to use in the RF
network
Integer 1 1 or 2 Yes ConfigPB
RfSignalLevel RF signal level _ _ Status
16