Campbell Scientific CR200/CR200X-series Dataloggers - Manual (Page 32)

Section 2. Quickstart Tutorial
Figure 21: PC200W Collect Data Tab
2.2.3.2.5 Procedure (PC200W Steps 7–9)
1. Click the OneMin box so a check mark appears in the box. Under the
"What to Collect" heading, select "New data from datalogger." This
selects which data will be collected.
2. Click on the Collect button. A progress bar will appear as the data is
collected, followed by the message, "Collection Complete." Click OK
to continue.
3. To view the data, click on the View icon at the top of the window. This
opens a new window.
Figure 22: PC200W View Data Utility
20