Horner APG RX371 OCS HERX371C101 User Manual
Page 56
CH.10
MAN0924-01-EN
February 8, 2010
Page 56 of 124
# 1018
“Enable AutoRun” displays the following options which can be selected:
Enable AutoRun
No
= OCS will be in IDLE mode after AutoLoad or Automatic Restore.
Yes
= OCS will be automatically placed into RUN mode after AutoLoad or
Automatic Restore.
“Enable AutoLoad” displays the following options which can be selected:
Enable AutoLoad
No
= Does not load AUTOLOAD.PGM automatically when application
program is absent or corrupted.
Yes
= Loads AUTOLOAD.PGM file automatically from RM when application
program is absent or corrupted.
Clone Unit
‘Clone Unit’ feature allows the user to “clone” the OCS of the exact same model. This feature “clones”
application program and unit settings stored in Battery backed RAM of an OCS into the RM (refer
Removable Media
for details on using RM). It can then be used to clone a different OCS (exact
same model).