Horner APG RX371 OCS HERX371C101 - Manual (Page 112)

CH. 16 MAN0924-01-EN
February 8, 2010 Page 112 of 124 # 1018
12 SMTP Error
Response
Error response received from
Email Server for Email
command sent.
Check configured Email server name (or
IP address), Port address, Email address
(To and From), Username and
Password.
13 to
16 SMTP Error State
code. This field provides SMTP
State (or command) code
where Error occurred. 1= DNS query State.
2= DNS Response State.
3= Establish Connection State.
4= SMTP HELO Command State.
5= SMTP Authentication State.
6= SMTP Username State.
7= SMTP Password State.
8= SMTP From Mail Address State.
9= SMTP Receiver Mail Address State
10=SMTP Data Command State.
11=SMTP Send Data State.
12=SMTP End Data State.
13=SMTP Quit State.
14=Waiting for Response.
17 to
32 SMTP Server Error
Response code. This field provides SMTP
Error response code
received from SMTP server. Details of different error codes can be
found in RFC 821 and RFC 2554
documents.
Eg: ‘500’ Syntax error, command
unrecognized.
Note: In Email feature transmit trigger bit should get reset within 30sec of time or Error status should
get updated indicating error information. If there is no status it means either Device is not in RUN mode
or Email feature is not configured or invalid Email configuration is downloaded.