Red Lion GEMINI 52 - Manual (Page 8)

FACTORY SETTINGS [Cont’d]
DUAL RATE WITH SPEED DIFF. FACTORY SETTINGS *
Keys Struck Display Description
4,1 41 3 Personality selected as DUAL RATE W/SPEED DIFF.
4,2 42 3 Reset Rate A & B outputs
4,3 43 1 Rate B Conversion Factor is Rate Per Second (x1)
4,5 45 4 Rate B Scale Multiplier of 1.0
4,6 46 1 Display C leading zero blanking and no decimal point
5,1 51 1 Output 1 assigned to Rate A, Output 2 to Rate B
5,2 52 3 Output 1 terminates at Reset, Normal Phase
5,3 0000.10 Timed Output 1 value of 0.1 Sec.
5,4 54 3 Output 2 terminates at Reset, Normal Phase
5,5 0000.10 Timed Output 2 value of 0.1 Sec.
6,2 62 1 Rate A Conversion Factor is Rate per Second (x1)
6,3 63 1 Rate Minimum Update Time of 0.5 Sec.
6,4 64 4 Rate A Scale Multiplier of 1
6,5 65 1 Rate A & B leading zero blanking, no decimal point
6,6 66 1 No functions except Reset enabled
3 01.0000 Scale Factor A (Rate A) set to 1.0000
3 01.0000 Scale Factor B (Rate B) set to 1.0000
1 000500 Preset 1 set to 500
2 001000 Preset 2 set to 1000
DUAL RATE WITH SPEED DRAW FACTORY SETTINGS *
Keys Struck Display Description
4,1 41 4 Personality selected as DUAL RATE W/SPEED DRAW
4,2 42 3 Reset Rate A & B outputs
4,3 43 1 Rate B Conversion Factor is Rate Per Second (x1)
4,5 45 4 Rate B Scale Multiplier of 1.0
4,6 46 1 Display C leading zero blanking and no decimal point
5,1 51 1 Output 1 assigned to Rate A, Output 2 to Rate B
5,2 52 3 Output 1 terminates at Reset, Normal Phase
5,3 0000.10 Timed Output 1 value of 0.1 Sec.
5,4 54 3 Output 2 terminates at Reset, Normal Phase
5,5 0000.10 Timed Output 2 value of 0.1 Sec.
6,1 61 1 Display C Multiplier of 1
6,2 62 1 Rate A Conversion Factor is Rate per Second (x1)
6,3 63 1 Rate Minimum Update Time of 0.5 Sec.
6,4 64 4 Rate A Scale Multiplier of 1
6,5 65 1 Rate A & B leading zero blanking, no decimal point
6,6 66 1 No functions except Reset enabled
3 01.0000 Scale Factor A (Rate A) set to 1.0000
3 01.0000 Scale Factor B (Rate B) set to 1.0000
1 000500 Preset 1 set to 500
2 001000 Preset 2 set to 1000
-6-
* If [41 1] is changed to [41 2], then the factory settings are as shown.
* If [41 1] is changed to [41 2], then the factory settings are as shown.