Red Lion GEMINI 52 User Manual

Page 6

PROGRAMMING THE PRESETS, SCALE FACTORS &

TIMED OUTPUT VALUES [Cont’d]

Note: A Timed Output Value of zero cannot be programmed into the Gemini

5200. If a value of 0 is entered into the display, and the “E” key is pressed, the

unit will remain in data entry mode. If a new value is not entered, it will time

out and the unit will continue to use its previous setting.

As with the other functions, you must press “E” to record the changes. For the

data entry modes, if you do not press the “E” key, a time out of 5 seconds occurs,

and the display returns to operating mode without any changes to the value. The

only time any change will occur is when the “E” key is pressed.

-4-